- DeTomaso - detomasolist.com

Another boring old Space City Panteras Pig Roast
by Kirby Schrader 26 May '16

26 May '16

http://www.spacecitypanteras.com/MeetingMinutes/styled-2/

3 2

test again
by Lynn Wall 25 May '16

25 May '16

Hopefully it works this time Lynn Hopefully it works this time Lynn

1 0

Re: [DeTomaso] Copyright law
by LEVITT1946＠aol.com 25 May '16

25 May '16

Hi All, I joined POCA and this forum back in 2008 when I purchased my Pantera. I had a serious problem with my car a few days before the car was to be transported to California and under the recommendation of my friend Hugh Casey I was introduced to this very active forum. I sent an email to the forum and within minutes guys from all over the world were rifling suggestions on things to check in the engine. I continue to tell everyone about the special comradery this group has . When I entered my car to drive across the USA in the Gumball3000(Santa Monica,CA to Miami Beach,FL) ,one member( Dennis "Mad Dawg" Antenucci) picked my son and I up at our hotel and drove us to PI Motorsports in Orange CA. Once the car was ready he then followed us and invited us into his home for dinner to make sure we were both ok and that the car could make the drive across the country. What club do you know would do that for a fellow member. The answer is none. This club has a special bond among members and that is the bottom line. When we started our Rally across the country the forum came together when we had an issue in Vegas. Once again a fellow member(Ralph Granchelli) helped us out and invited us into his home for repair. The Space City Pantera Club then helped us in Houston bring a/c to our car for the first time in 20 years. We had a club member meet us in every city we entered. This is a special club not only for Panteras but also for Friendship and I stress Friendship. What ever the issue is, I am confident it will be resolved peacefully. Best regards, Bob Levitt 516-695-0854 cell In a message dated 5/24/2016 4:49:18 P.M. Eastern Daylight Time, tipo874(a)gmail.com writes: I have a couple of months until I'm up for renewal, and there has to be some serious improvements before I renew. I have been a member since 2000, when I bought the car and with the current state of affairs I will just let my membership expire. Thomas 24 maj 2016 kl. 18:56 skrev Daniel C Jones <daniel.c.jones2(a)gmail.com>: >> What does this have to do with Panteras or DeTomaso? > Reading between the lines, it appears POCA's "Dear Leader" saw someone > re-posting one of his many unflattering posts and is threatening Kurt > with legal action unless all of his posts are removed from the DeTomaso > mailing list archives (claims he has copyright on all material he > posted to the list).A That guy is a real piece of work and not who I > want representing our club.A My POCA membership is up for renewal and > I'm having a very hard time justifying re-joining, even though I've > been a member since the 1990s.A > Dan Jones > _______________________________________________ > > Detomaso Forum NO LONGER Managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Hi All, I joined POCA and this forum back in 2008 when I purchased my Pantera. I had a serious problem with my car a few days before the car was to be transported to California and under the recommendation of my friend Hugh Casey I was introduced to this very active forum. I sent an email to the forum and within minutes guys from all over the world were rifling suggestions on things to check in the engine. I continue to tell everyone about the special comradery this group has . When I entered my car to drive across the USA in the Gumball3000(Santa Monica,CA to Miami Beach,FL) ,one member( Dennis "Mad Dawg" Antenucci) picked my son and I up at our hotel and drove us to PI Motorsports in Orange CA. Once the car was ready he then followed us and invited us into his home for dinner to make sure we were both ok and that the car could make the drive across the country. What club do you know would do that for a fellow member. The answer is none. This club has a special bond among members and that is the bottom line. When we started our Rally across the country the forum came together when we had an issue in Vegas. Once again a fellow member(Ralph Granchelli) helped us out and invited us into his home for repair. The Space City Pantera Club then helped us in Houston bring a/c to our car for the first time in 20 years. We had a club member meet us in every city we entered. This is a special club not only for Panteras but also for Friendship and I stress Friendship. What ever the issue is, I am confident it will be resolved peacefully. Best regards, Bob Levitt 516-695-0854 cell In a message dated 5/24/2016 4:49:18 P.M. Eastern Daylight Time, tipo874(a)gmail.com writes: I have a couple of months until I'm up for renewal, and there has to be some serious improvements before I renew. I have been a member since 2000, when I bought the car and with the current state of affairs I will just let my membership expire. Thomas 24 maj 2016 kl. 18:56 skrev Daniel C Jones <daniel.c.jones2(a)gmail.com>: >> What does this have to do with Panteras or DeTomaso? > Reading between the lines, it appears POCA's "Dear Leader" saw someone > re-posting one of his many unflattering posts and is threatening Kurt > with legal action unless all of his posts are removed from the DeTomaso > mailing list archives (claims he has copyright on all material he > posted to the list).A That guy is a real piece of work and not who I > want representing our club.A My POCA membership is up for renewal and > I'm having a very hard time justifying re-joining, even though I've > been a member since the 1990s.A > Dan Jones > _______________________________________________ > > Detomaso Forum NO LONGER Managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above.

6 5

Porsche Fuchs wheels
by dfl 25 May '16

25 May '16

Off message however.... Would anyone know of or have a set of Fuchs wheels for a 1986 911 car!? Efforts appreciated! Please email me off list. Thanks, Warren Off message however.... Would anyone know of or have a set of Fuchs wheels for a 1986 911 car!? Efforts appreciated! Please email me off list. Thanks, Warren

3 2

Re: [DeTomaso] Oil drain plug seal
by Asa Jay Laughton 25 May '16

25 May '16

It's also possible the drain hole may be cracked, allowing some seepage. I have a stock radiator with a similar issue (not being used). Asa Jay Sent using Jedi Mind Tricks James coyne <tecnosound(a)hotmail.com> wrote: >I myself have had better sealing against seepage using plastic or nylon washers . As Daryl mentioned , beware of over torquing the plug . - Jim > >Date: Wed, 25 May 2016 11:20:18 -0500 >From: daryl.architect(a)gmail.com >To: sjcarguy60(a)yahoo.com >CC: detomaso(a)server.detomasolist.com >Subject: Re: [DeTomaso] Oil drain plug seal > >Was it a new copper washer? I once had to re-use a washer and had a tad of >drippage until I could get a new one. You definitely don't want to crank >the plug down too hard. > >On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso < >detomaso(a)server.detomasolist.com> wrote: > >> Hi guys and ladies, >> Is it ok if I ask a question not about the POCA website or the BOD or >> copyrights etc.? (Sorry just kidding!) >> >> Anyway, I changed the engine oil and ZF lube this last weekend. I >> discovered that my oil drain plug had been seeping. It had a plastic >> washer on it so I changed to a copper one. I tightened it as tight as I >> dare but it still seeps a bit. Is there a torques spec for this >> somewhere? Any ideas on how to get a tight seal? >> >> Thanks, >> Dennis >> >> _______________________________________________ >> >> >> Detomaso Forum NO LONGER Managed by POCA >> Posted emails must not exceed 1.5 Megabytes >> DeTomaso mailing list >> DeTomaso(a)server.detomasolist.com >> http://server.detomasolist.com/mailman/listinfo/detomaso >> >> To manage your subscription (change email address, unsubscribe, etc.) use >> the links above. >> >> Members who post to this list grant license to the list to forward any >> message posted here to all past, current, or future members of the list. >> They also grant the list owner permission to maintain an archive or approve >> the archiving of list messages. >> > >_______________________________________________ > > >Detomaso Forum NO LONGER Managed by POCA >Posted emails must not exceed 1.5 Megabytes >DeTomaso mailing list >DeTomaso(a)server.detomasolist.com >http://server.detomasolist.com/mailman/listinfo/detomaso > >To manage your subscription (change email address, unsubscribe, etc.) use the links above. > >Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. > I myself have had better sealing against seepage using plastic or nylon > washers . As Daryl mentioned , beware of over torquing the plug . - > Jim > Date: Wed, 25 May 2016 11:20:18 -0500 > From: daryl.architect(a)gmail.com > To: sjcarguy60(a)yahoo.com > CC: detomaso(a)server.detomasolist.com > Subject: Re: [DeTomaso] Oil drain plug seal >Was it a new copper washer? I once had to re-use a washer and had a tad of >drippage until I could get a new one. You definitely don't want to crank >the plug down too hard. > >On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso < >detomaso(a)server.detomasolist.com> wrote: > >> Hi guys and ladies, >> Is it ok if I ask a question not about the POCA website or the BOD or >> copyrights etc.? (Sorry just kidding!) >> >> Anyway, I changed the engine oil and ZF lube this last weekend. I >> discovered that my oil drain plug had been seeping. It had a plastic >> washer on it so I changed to a copper one. I tightened it as tight as I >> dare but it still seeps a bit. Is there a torques spec for this >> somewhere? Any ideas on how to get a tight seal? >> >> Thanks, >> Dennis >> >> _______________________________________________ >> >> >> Detomaso Forum NO LONGER Managed by POCA >> Posted emails must not exceed 1.5 Megabytes >> DeTomaso mailing list >> DeTomaso(a)server.detomasolist.com >> [1]http://server.detomasolist.com/mailman/listinfo/detomaso >> >> To manage your subscription (change email address, unsubscribe, etc.) use >> the links above. >> >> Members who post to this list grant license to the list to forward any >> message posted here to all past, current, or future members of the list. >> They also grant the list owner permission to maintain an archive or approve >> the archiving of list messages. >> > > _______________________________________________ Detomaso Forum NO > LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso To manage your > subscription (change email address, unsubscribe, etc.) use the links > above. Members who post to this list grant license to the list to > forward any message posted here to all past, current, or future members > of the list. They also grant the list owner permission to maintain an > archive or approve the archiving of list messages. > >References > > 1. http://server.detomasolist.com/mailman/listinfo/detomaso > >_______________________________________________ > > >Detomaso Forum NO LONGER Managed by POCA >Posted emails must not exceed 1.5 Megabytes >DeTomaso mailing list >DeTomaso(a)server.detomasolist.com >http://server.detomasolist.com/mailman/listinfo/detomaso > >To manage your subscription (change email address, unsubscribe, etc.) use the links above. > >Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. It's also possible the drain hole may be cracked, allowing some seepage. I have a stock radiator with a similar issue (not being used). Asa Jay Sent using Jedi Mind Tricks James coyne <tecnosound(a)hotmail.com> wrote: I myself have had better sealing against seepage using plastic or nylon washers . As Daryl mentioned , beware of over torquing the plug . - Jim Date: Wed, 25 May 2016 11:20:18 -0500 From: daryl.architect(a)gmail.com To: sjcarguy60(a)yahoo.com CC: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil drain plug seal Was it a new copper washer? I once had to re-use a washer and had a tad of drippage until I could get a new one. You definitely don't want to crank the plug down too hard. On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso < detomaso(a)server.detomasolist.com> wrote: > Hi guys and ladies, > Is it ok if I ask a question not about the POCA website or the BOD or > copyrights etc.? (Sorry just kidding!) > > Anyway, I changed the engine oil and ZF lube this last weekend. I > discovered that my oil drain plug had been seeping. It had a plastic > washer on it so I changed to a copper one. I tightened it as tight as I > dare but it still seeps a bit. Is there a torques spec for this > somewhere? Any ideas on how to get a tight seal? > > Thanks, > Dennis > > _______________________________________________ > > > Detomaso Forum NO LONGER Managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. I myself have had better sealing against seepage using plastic or nylon washers . As Daryl mentioned , beware of over torquing the plug . - Jim Date: Wed, 25 May 2016 11:20:18 -0500 From: daryl.architect(a)gmail.com To: sjcarguy60(a)yahoo.com CC: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil drain plug seal Was it a new copper washer? I once had to re-use a washer and had a tad of drippage until I could get a new one. You definitely don't want to crank the plug down too hard. On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso < detomaso(a)server.detomasolist.com> wrote: > Hi guys and ladies, > Is it ok if I ask a question not about the POCA website or the BOD or > copyrights etc.? (Sorry just kidding!) > > Anyway, I changed the engine oil and ZF lube this last weekend. I > discovered that my oil drain plug had been seeping. It had a plastic > washer on it so I changed to a copper one. I tightened it as tight as I > dare but it still seeps a bit. Is there a torques spec for this > somewhere? Any ideas on how to get a tight seal? > > Thanks, > Dennis > > _______________________________________________ > > > Detomaso Forum NO LONGER Managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > [1]http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

1 0

The 10 Most Forgotten Supercars in Automotive History
by Jeff Udelson 25 May '16

25 May '16

Pantera is number 9 The 10 Most Forgotten Supercars in Automotive History | | | | | | | | | | | The 10 Most Forgotten Supercars in Automotive History From automotive giants to forgotten startups, these are the 10 most criminally forgotten supercars in automotive... | | | | Pantera is number 9 [1]The 10 Most Forgotten Supercars in Automotive History The 10 Most Forgotten Supercars in Automotive History From automotive giants to forgotten startups, these are the 10 most criminally forgotten supercars in automotive... References Visible links 1. http://www.cheatsheet.com/automobiles/10-supercars-that-were-worth-more-tha… Hidden links: 3. http://www.cheatsheet.com/automobiles/10-supercars-that-were-worth-more-tha…

2 1

spam and virus filters
by Joseph F. Byrd, Jr. 25 May '16

25 May '16

Besides the substantial increase in my email traffic, I have had an expositional increase in my spam filter quarantine and virus alerts. (Use to be one a YEAR, now several per DAY) Anyone else seeing such an increase. Given access to POCA and the list were about the same time? Besides the substantial increase in my email traffic, I have had an expositional increase in my spam filter quarantine and virus alerts. (Use to be one a YEAR, now several per DAY) Anyone else seeing such an increase. Given access to POCA and the list were about the same time?

5 4

POCA membership
by Rod Kunishige 25 May '16

25 May '16

Answer: Like the former SCOTUS, this one splits 5 to 4. It would help if their mtg minutes were posted on their new web site, POCA.com, for all paid members to see simply because secrecy breeds what we see here. Answer: Like the former SCOTUS, this one splits 5 to 4. It would help if their mtg minutes were posted on their new web site, POCA.com, for all paid members to see simply because secrecy breeds what we see here.

4 6

The Mission Statement of POCA
by Ed Mendez 25 May '16

25 May '16

The Mission Statement of POCA: POCA (Pantera Owners Club of America) exists to provide news, technical information, planned/coordinated events, and opportunities for owners and fans of all DeTomaso models to interact in social situations designed to enhance the ownership experience.

3 3

POCA membership‏
by Rod Kunishige 25 May '16

25 May '16

Good news. POCA Board mtg minutes are now open to paid members. Good news. POCA Board mtg minutes are now open to paid members.

1 0