- DeTomaso - detomasolist.com

ZF service
by thpnma02869＠yahoo.com 15 Sep '16

15 Sep '16

My GTS from 1972 has never had any service on the gearbox, other than changing oil. The gearbox spills a little oil in on the floor in the garage, not much, and I think that it howls a bit especially in 5th gear. I am therefore thinking of a service with safety wiring etc., and to have a longer 5th gear, as it revs unnecessarily much on European motorways with 4,22 differential and 0,70 5th gear. It would be easiest for me to have the work done in Europe, if there are workshops here who can do the work? Sending the gearbox e.g. to LLoyd Butfoy RBT in California would really be a long way, around 6000 miles from Copenhagen. If I must sent it to the US, the east coast would be a much shorter distance, but I don't know who is competent to do the job. All suggestions will be much appreciated, as well as - if possible - a rough idea about what it can cost. Cristiano Rossi My GTS from 1972 has never had any service on the gearbox, other than changing oil. The gearbox spills a little oil in on the floor in the garage, not much, and I think that it howls a bit especially in 5th gear. I am therefore thinking of a service with safety wiring etc., and to have a longer 5th gear, as it revs unnecessarily much on European motorways with 4,22 differential and 0,70 5th gear. It would be easiest for me to have the work done in Europe, if there are workshops here who can do the work? Sending the gearbox e.g. to LLoyd Butfoy RBT in California would really be a long way, around 6000 miles from Copenhagen. If I must sent it to the US, the east coast would be a much shorter distance, but I don't know who is competent to do the job. All suggestions will be much appreciated, as well as - if possible - a rough idea about what it can cost. Cristiano Rossi

3 3

Oil Leak Fixed. What Torque?
by Himes, Terry (397C) 15 Sep '16

15 Sep '16

Hey Pantera Guru's, I finally got to my Pantera last night. (work is getting in the way of my fun!!) Simple fix. ALL my valve cover bolts were loose. Every one of them. I tightened them all but didn't want to over tighten them. Anyone know what the correct torque should be? I have roller rockers and the taller Ford Racing valve covers for clearance. Your thoughts? Terry "A Purple Heart proves you were smart enough to hatch a plan, stupid enough to try it and lucky enough to survive!" Terry W. Himes JPL Jet Propulsion Laboratory Dawn Spacecraft Team Rosetta Sequence Team Lead Phone: (818) 393-6261 Cell: (818) 653-8213 Fax: (818) 393-3147 thimes(a)jpl.nasa.gov<mailto:thimes@jpl.nasa.gov> 🇺🇸 Hey Pantera Guru's, I finally got to my Pantera last night. (work is getting in the way of my fun!!) Simple fix. ALL my valve cover bolts were loose. Every one of them. I tightened them all but didn't want to over tighten them. Anyone know what the correct torque should be? I have roller rockers and the taller Ford Racing valve covers for clearance. Your thoughts? Terry "A Purple Heart proves you were smart enough to hatch a plan, stupid enough to try it and lucky enough to survive!" Terry W. Himes JPL Jet Propulsion Laboratory Dawn Spacecraft Team Rosetta Sequence Team Lead Phone: (818) 393-6261 Cell: (818) 653-8213 Fax: (818) 393-3147 [1]thimes(a)jpl.nasa.gov References 1. mailto:thimes@jpl.nasa.gov

5 7

Really good Pantera(s) wanted
by MikeLDrew＠aol.com 15 Sep '16

15 Sep '16

Guys, I've got a good friend who has been into genuine Cobras and Shelbys for many years and has finally decided to branch out into Panteras. He is just getting smart on them, and has entered the market looking to buy. He is looking for the kind of car that is ringing the bells at auctions these days--highly original, unmolested, with tasteful mechanical upgrades okay. No wings, flares, or hot-rod modifications are wanted. He's looking for concours-minus, or driver-plus cars, with the ambition of perhaps buying more than one. If he found a totally mint Pebble Beach-caliber car, he then might also be interested in one that was more towards the driver end of the spectrum. If any of you know of any cars that fit the bill, please let me know privately. THANKS! Mike Guys, I've got a good friend who has been into genuine Cobras and Shelbys for many years and has finally decided to branch out into Panteras. He is just getting smart on them, and has entered the market looking to buy. He is looking for the kind of car that is ringing the bells at auctions these days--highly original, unmolested, with tasteful mechanical upgrades okay. No wings, flares, or hot-rod modifications are wanted. He's looking for concours-minus, or driver-plus cars, with the ambition of perhaps buying more than one. If he found a totally mint Pebble Beach-caliber car, he then might also be interested in one that was more towards the driver end of the spectrum. If any of you know of any cars that fit the bill, please let me know privately. THANKS! Mike

1 0

Re: [DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque?
by bill＠incendium.com 15 Sep '16

15 Sep '16

I J A F V C G. Snugg is good. CheersBill MooreCalgary -------- Original message --------From: "Joseph F. Byrd, Jr." <byrdjf(a)embarqmail.com> Date: 2016-09-14 6:00 PM (GMT-07:00) To: 'detomasolist' <detomaso(a)server.detomasolist.com> Subject: Re: [DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque? I haven't been able to find on line, so if someone knows the dimensions of a valve cover gasket (length, width, width) I would appreciate. I am now curious and need to calculate! BTW, 10ft-lbs just for a 1/4-20 seems pretty high. That should have the bolt torque sufficient to prevent backing off (once retorqued after gasket relaxed) -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Dave Londry Sent: Wednesday, September 14, 2016 19:24 PM To: detomasolist Subject: [DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque? My collection of other peoples Torque info, these 2 agree at 10 ft.lb. Needs a 1/4 drive torque wrench - you're in the weeds with the tension spring fully unwound if you use 3/8. (I have a bunch nor added yet - another roundtuit job) Dave On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote: > Hey Pantera Guru's, > I finally got to my Pantera last night. (work is getting in the way of > my fun!!) > Simple fix. ALL my valve cover bolts were loose. Every one of them. > I tightened them all > but didn't want to over tighten them. Anyone know what the correct > torque should be? > I have roller rockers and the taller Ford Racing valve covers for > clearance. > Your thoughts? > Terry > > "A Purple Heart proves you were smart enough to hatch a plan, > > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > > JPL Jet Propulsion Laboratory > > Dawn Spacecraft Team > > Rosetta Sequence Team Lead > > Phone: (818) 393-6261 > > Cell: (818) 653-8213 > > Fax: (818) 393-3147 > > [1]thimes(a)jpl.nasa.gov > > References > > 1.mailto:thimes@jpl.nasa.gov > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA Posted emails must not > exceed 1.5 Megabytes DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. I J A F V C G. Snugg is good. Cheers Bill Moore Calgary -------- Original message -------- From: "Joseph F. Byrd, Jr." <byrdjf(a)embarqmail.com> Date: 2016-09-14 6:00 PM (GMT-07:00) To: 'detomasolist' <detomaso(a)server.detomasolist.com> Subject: Re: [DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque? I haven't been able to find on line, so if someone knows the dimensions of a valve cover gasket (length, width, width) I would appreciate. I am now curious and need to calculate! BTW, 10ft-lbs just for a 1/4-20 seems pretty high. That should have the bolt torque sufficient to prevent backing off (once retorqued after gasket relaxed) -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Dave Londry Sent: Wednesday, September 14, 2016 19:24 PM To: detomasolist Subject: [DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque? My collection of other peoples Torque info, these 2 agree at 10 ft.lb. Needs a 1/4 drive torque wrench - you're in the weeds with the tension spring fully unwound if you use 3/8. (I have a bunch nor added yet - another roundtuit job) Dave On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote: > Hey Pantera Guru's, > I finally got to my Pantera last night. (work is getting in the way of > my fun!!) > Simple fix. ALL my valve cover bolts were loose. Every one of them. > I tightened them all > but didn't want to over tighten them. Anyone know what the correct > torque should be? > I have roller rockers and the taller Ford Racing valve covers for > clearance. > Your thoughts? > Terry > > "A Purple Heart proves you were smart enough to hatch a plan, > > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > > JPL Jet Propulsion Laboratory > > Dawn Spacecraft Team > > Rosetta Sequence Team Lead > > Phone: (818) 393-6261 > > Cell: (818) 653-8213 > > Fax: (818) 393-3147 > > [1]thimes(a)jpl.nasa.gov > > References > > 1.mailto:thimes@jpl.nasa.gov > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA Posted emails must not > exceed 1.5 Megabytes DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

1 0

Fwd: Re: Oil Leak Fixed. What Torque?
by Dave Londry 14 Sep '16

14 Sep '16

With a new polymer gasket, it should pretty much settle after 1 heat cycle. Cork always seems to compress a bit more. Dave On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote: > Hey Pantera Guru's, > I finally got to my Pantera last night. (work is getting in the way of > my fun!!) > Simple fix. ALL my valve cover bolts were loose. Every one of them. > I tightened them all > but didn't want to over tighten them. Anyone know what the correct > torque should be? > I have roller rockers and the taller Ford Racing valve covers for > clearance. > Your thoughts? > Terry > > "A Purple Heart proves you were smart enough to hatch a plan, > > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > > JPL Jet Propulsion Laboratory > > Dawn Spacecraft Team > > Rosetta Sequence Team Lead > > Phone: (818) 393-6261 > > Cell: (818) 653-8213 > > Fax: (818) 393-3147 > > [1]thimes(a)jpl.nasa.gov > > References > > 1.mailto:thimes@jpl.nasa.gov > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. With a new polymer gasket, it should pretty much settle after 1 heat cycle. Cork always seems to compress a bit more. Dave On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote: Hey Pantera Guru's, I finally got to my Pantera last night. (work is getting in the way of my fun!!) Simple fix. ALL my valve cover bolts were loose. Every one of them. I tightened them all but didn't want to over tighten them. Anyone know what the correct torque should be? I have roller rockers and the taller Ford Racing valve covers for clearance. Your thoughts? Terry "A Purple Heart proves you were smart enough to hatch a plan, stupid enough to try it and lucky enough to survive!" Terry W. Himes JPL Jet Propulsion Laboratory Dawn Spacecraft Team Rosetta Sequence Team Lead Phone: (818) 393-6261 Cell: (818) 653-8213 Fax: (818) 393-3147 [[1]1]thimes(a)jpl.nasa.gov References 1. [2]mailto:thimes@jpl.nasa.gov _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [3]DeTomaso(a)server.detomasolist.com [4]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the li nks above. Members who post to this list grant license to the list to forward any message p osted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of lis t messages. References 1. mailto:1]thimes@jpl.nasa.gov 2. mailto:thimes@jpl.nasa.gov 3. mailto:DeTomaso@server.detomasolist.com 4. http://server.detomasolist.com/mailman/listinfo/detomaso

1 0

'73 L on eBay in Whittier, CA
by Julian Kift 14 Sep '16

14 Sep '16

On eBay in Whittier CA, this looks to be an exceptionally nice Pantera for the money and considering the reserve has been met with bidding at $65,000. I'm interested to see how far bidding goes in the next 5 days. http://www.ebay.com/itm/De-Tomaso-Pantera-/152232124242?forcerrptr=true&has… Julian On eBay in Whittier CA, this looks to be an exceptionally nice Pantera for the money and considering the reserve has been met with bidding at $65,000. I'm interested to see how far bidding goes in the next 5 days. [1]http://www.ebay.com/itm/De-Tomaso-Pantera-/152232124242?forcerrptr=t rue&hash=item2371bddf52:g:GNoAAOSwknJXzu2a&item=152232124242 Julian References 1. http://www.ebay.com/itm/De-Tomaso-Pantera-/152232124242?forcerrptr=true&has…

9 15

Re: [DeTomaso] Oil Leak Fixed. What Torque?
by marshallgsmith 14 Sep '16

14 Sep '16

To avoid over-tightening, don't use a ratchet. Use a nut driver instead. Sent from my Verizon 4G LTE smartphone -------- Original message -------- From: Larry - Ohio Time <Larry(a)OhioTimeCorp.com> Date: 9/14/16 1:03 PM (GMT-08:00) To: 'Charles McCall' <charlesmccall(a)gmail.com>, "'Himes, Terry (397C)'" <terry.himes(a)jpl.nasa.gov> Cc: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil Leak Fixed. What Torque? << I just tighten so it feels tight without over tightening>> When I asked a similar question in class the teacher told me use "MF"! "Mechanic's Feel"....as I was told later. Larry (got the feeling) - Cleveland -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Charles McCall Sent: Wednesday, September 14, 2016 3:55 PM To: Himes, Terry (397C) Cc: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil Leak Fixed. What Torque? Terry - I can't answer your specific question as to proper torque, but I can offer some practical experience. I remove the valve covers every year as I have solid lifters and I check/adjust the lash once a year. I just tighten so it feels tight without overtightening - which I realize is neither a Metric nor Standard unit of measure - and I don't have leaks. I have blue Fel-pro valve covers, which allow a certain amount of compression. I just tighten it down fairly snug, by hand, without overtightening and I have never had problems. On Wed, Sep 14, 2016 at 9:36 PM, Himes, Terry (397C) < terry.himes(a)jpl.nasa.gov> wrote: > Hey Pantera Guru's, > I finally got to my Pantera last night. (work is getting in the way of > my fun!!) > Simple fix. ALL my valve cover bolts were loose. Every one of them. > I tightened them all > but didn't want to over tighten them. Anyone know what the correct > torque should be? > I have roller rockers and the taller Ford Racing valve covers for > clearance. > Your thoughts? > Terry > > "A Purple Heart proves you were smart enough to hatch a plan, > > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > > JPL Jet Propulsion Laboratory > > Dawn Spacecraft Team > > Rosetta Sequence Team Lead > > Phone: (818) 393-6261 > > Cell: (818) 653-8213 > > Fax: (818) 393-3147 > > [1]thimes(a)jpl.nasa.gov > > References > > 1. mailto:thimes@jpl.nasa.gov > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. To avoid over-tightening, don't use a ratchet. Use a nut driver instead. Sent from my Verizon 4G LTE smartphone -------- Original message -------- From: Larry - Ohio Time <Larry(a)OhioTimeCorp.com> Date: 9/14/16 1:03 PM (GMT-08:00) To: 'Charles McCall' <charlesmccall(a)gmail.com>, "'Himes, Terry (397C)'" <terry.himes(a)jpl.nasa.gov> Cc: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil Leak Fixed. What Torque? << I just tighten so it feels tight without over tightening>> When I asked a similar question in class the teacher told me use "MF"! "Mechanic's Feel"....as I was told later. Larry (got the feeling) - Cleveland -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Charles McCall Sent: Wednesday, September 14, 2016 3:55 PM To: Himes, Terry (397C) Cc: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Oil Leak Fixed. What Torque? Terry - I can't answer your specific question as to proper torque, but I can offer some practical experience. I remove the valve covers every year as I have solid lifters and I check/adjust the lash once a year. I just tighten so it feels tight without overtightening - which I realize is neither a Metric nor Standard unit of measure - and I don't have leaks. I have blue Fel-pro valve covers, which allow a certain amount of compression. I just tighten it down fairly snug, by hand, without overtightening and I have never had problems. On Wed, Sep 14, 2016 at 9:36 PM, Himes, Terry (397C) < terry.himes(a)jpl.nasa.gov> wrote: > Hey Pantera Guru's, > I finally got to my Pantera last night. (work is getting in the way of > my fun!!) > Simple fix. ALL my valve cover bolts were loose. Every one of them. > I tightened them all > but didn't want to over tighten them. Anyone know what the correct > torque should be? > I have roller rockers and the taller Ford Racing valve covers for > clearance. > Your thoughts? > Terry > > "A Purple Heart proves you were smart enough to hatch a plan, > > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > > JPL Jet Propulsion Laboratory > > Dawn Spacecraft Team > > Rosetta Sequence Team Lead > > Phone: (818) 393-6261 > > Cell: (818) 653-8213 > > Fax: (818) 393-3147 > > [1]thimes(a)jpl.nasa.gov > > References > > 1. mailto:thimes@jpl.nasa.gov > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

1 0

Re: [DeTomaso] Pantera on Fast & Loud
by marshall smith 14 Sep '16

14 Sep '16

Side scoops on the quarter windows ducted to the intercooler would work well but then, you'd have to lose that hideous cow catcher of an air scoop. m -------------------------------------------- On Wed, 9/14/16, gudmund frøland via DeTomaso <detomaso(a)server.detomasolist.com> wrote: Subject: Re: [DeTomaso] Pantera on Fast & Loud To: "rfmccall(a)comcast.net" <rfmccall(a)comcast.net>, "gaino, bill" <gaino(a)earthlink.net> Cc: "Email List Address For Posting" <detomaso(a)server.detomasolist.com>, "Larry Finch" <fresnofinches(a)aol.com> Date: Wednesday, September 14, 2016, 11:17 AM Seems like there are a big intercooler laying there ? Den Onsdag, 14. september 2016 20.12 skrev "rfmccall(a)comcast.net" <rfmccall(a)comcast.net>: Here is a pic from FB. Ron ----- Original Message ----- From: "bill gaino" <[1]gaino(a)earthlink.net> To: "Larry Finch" <[2]fresnofinches(a)aol.com>, "Email List Address For Posting" <[3]detomaso(a)server.detomasolist.com> Sent: Wednesday, September 14, 2016 1:41:18 PM Subject: Re: [DeTomaso] Pantera on Fast & Loud The scoop looks like it feeds the ZF.. Fugly Bill 1362 [4]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts& fref=ts If you want it slick. www.slickpaint.com like us on facebook -----Original Message----- >From: Larry Finch via DeTomaso <[5]detomaso(a)server.detomasolist.com> >Sent: Sep 13, 2016 1:03 PM >To: Email List Address For Posting <[6]detomaso(a)server.detomasolist.com> >Subject: [DeTomaso] Pantera on Fast & Loud > >All, > >I am resending this screen capture from last nightas show, as my previous post seems to have lost its subject line. > >Please don't shoot the messenger. > >Since Richard liked the Nike interior disaster on the Ring Brothers hack-job (at least enough to buy the thing), I imagine they will F-up the interior of this Pantera to match their exterior disfigurement. > >Larry > >I am especially enamored with the tasteful deck lid cut-out necessitated by the taller 3.5L V6. > > > > > > > > > _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [7]DeTomaso(a)server.detomasolist.com [8]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [9]DeTomaso(a)server.detomasolist.com [10]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. mailto:gaino@earthlink.net 2. mailto:fresnofinches@aol.com 3. mailto:detomaso@server.detomasolist.com 4. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts 5. mailto:detomaso@server.detomasolist.com 6. mailto:detomaso@server.detomasolist.com 7. mailto:DeTomaso@server.detomasolist.com 8. http://server.detomasolist.com/mailman/listinfo/detomaso 9. mailto:DeTomaso@server.detomasolist.com 10. http://server.detomasolist.com/mailman/listinfo/detomaso -----Inline Attachment Follows----- _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

1 0

Re: [DeTomaso] (no subject)
by cengles＠cox.net 14 Sep '16

14 Sep '16

Dear Larry, I am very sensitive and after looking at that picture, my eyes hurt........ Warmest regards, Chuck Engles On Tue, Sep 13, 2016 at 1:15 AM, Larry Finch via DeTomaso wrote: > Everyone knows a set of webers requires some notching on the leading > edge of the deck lid. When you put in a 3.5 L V6 that sits much higher > than the Cleveland, the Gas Monkey crew learned a similar leading edge > cut out is required. > And of course an air scoop always looks really cool on a hot rod car, > right? > > Perhaps what this screen capture shows gets tossed out before the > final result, but this is just wrong. > > Larry > > > > ------------------------------ > > > > Sent from me using a magic, handheld electronic gizmo. > ------------------------------ > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) > use the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the > list. They also grant the list owner permission to maintain an archive > or approve the archiving of list messages.

2 1

rust away stuff
by Joseph F. Byrd, Jr. 14 Sep '16

14 Sep '16

What was the brand name of the GOOD rust desolving solution that was recently discussed Joe/NC What was the brand name of the GOOD rust desolving solution that was recently discussed Joe/NC

3 3