- DeTomaso - detomasolist.com

Re: [DeTomaso] Water in glove box
by marshallgsmith 22 Sep '16

22 Sep '16

Hey Larry, Where the hell did you learn that leak detection method....your proctologist? M Sent from my Verizon 4G LTE smartphone -------- Original message -------- From: Dave Londry <davel(a)emspace.com> Date: 9/18/16 4:45 PM (GMT-08:00) To: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Water in glove box Well crap Larry - that's about how I look for cooling system leaks, but I never thought of car leaks. Awesome! Dvae On 2016-09-18 7:34 AM, Larry - Ohio Time wrote: > Robert, > > > I do things a bit differently (who's surprised?) to find water leak. On my > big Sears shop vac it has a blower connection. I make an adapter plate, with > hole for the vac hose, to fit into the window channel with the window down 5 > or 6". You will need to tape the panel in good with painters tape to seal > it. > > The next thing you will need is a spray bottle with a bit of soap in it. I > use my car washing soap so not to mess up my wax job. > > When you turn the vac on, with the hose in the "blow hole" you are now > pressurizing the cabin of the car. > > Spray the soapy water around and you will see it bubble up where you have a > leak. You will be surprised by the number leaks you find. > > Larry (I doun't always suck) - Cleveland > > > > -----Original Message----- > From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf > Of Robert Stroj > Sent: Sunday, September 18, 2016 4:57 AM > To: detomaso(a)server.detomasolist.com > Subject: Re: [DeTomaso] Water in glove box > > Hi, > > > > Thanks for all the suggestions, I hope that it could be a case of a leak > trough the went tube. > > My car is early model with direct vent, operated by a pull-lever below the > AC control button. > > > > I really think this makes sense as amount of water (roughly 1L I would > estimate) that entered after just quick wash seems impossible to get through > window gasket.I hope! > > Now I do not have access to the car till spring, but remember noticing that > window seal has been sealed additionally with black silicon, so hope that is > OK. > > Once I get back to Europe will open scrim panels around wipers and check if > I can find what's going on there. > > I guess there must be somewhere a drain in there; might be plugged and then > all water just leaks trough vent opening. > > > > Thanks again for all the responses, Robert > > > > From: The Goyaniuks [mailto:andriykoisg@yahoo.ca] > Sent: Saturday, September 17, 2016 2:19 PM > To: jgkrenton(a)comcast.net; Robert Stroj; detomaso(a)server.detomasolist.com > Subject: Re: [DeTomaso] Water in glove box > > > > In early cars, I believe there was a fresh air "tube" or cylinder that was > installed in the passenger side cowl vent "tub". In addition there is a > water drain in the cowl vent "tub". In the event of a crack or corrosion in > the weld that attaches these items ... it could be the source of the leak. > > > > HTH > > > > > > > > _____ > > From: "jgkrenton(a)comcast.net" <jgkrenton(a)comcast.net> > To: Robert Stroj <npdrs(a)maui.net> > Cc: detomaso(a)server.detomasolist.com > Sent: Saturday, September 17, 2016 7:54 PM > Subject: Re: [DeTomaso] Water in glove box > > > Dolomites are beautiful. > On my car (2467) it's the lower windshield seal leaking that fills up > the glove box. > It rains in Seattle. > FYI. > Jeff > __________________________________________________________________ > > From: "Robert Stroj" <npdrs(a)maui.net> > To: detomaso(a)server.detomasolist.com > Sent: Saturday, September 17, 2016 9:40:43 AM > Subject: [DeTomaso] Water in glove box > > > Hi, every time I wash my Pantera (71 model) I was finding front right > carpet > getting wet in the foot area. > Last time I happened to open glove box after the wash and it was > totally > filled with water! > Driver side seems to stay dry. > This is not even pressure wash, just regular wash without crazy > spraying > around the door frames etc... > I guess it must somehow come in through the front went holes behind the > hood? > It seems that when I washed the car parked slightly nose up it stayed > dry. > Also, recently got caught in heavy rain, but did not really get water > inside; maybe when car moves it drains different way...? > Did anyone have a similar problem and any suggestions where to look/how > to > fix? > Also, my wipers work just on second speed; on first nothing happens. > Would > that likely be a switch issue or it could be that they are wired wrong? > Thanks, Robert > PS. A nice photo from recent drive over Dolomites...just trying to pull > out > front fender lip a bit :) > _______________________________________________ > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > To manage your subscription (change email address, unsubscribe, etc.) > use the links above. > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the > list. They also grant the list owner permission to maintain an archive > or approve the archiving of list messages. > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. > > -- Dave Londry Embedded Spaces Inc. (ESI) davel(a)emspace.com 904 429 1937 (SkypeCall FLA) Skype:embeddedspaces Canada Numbers 604 721 2278 (cell) 604 589 9182 (shop line) 604 589 9183 (home line) _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. Hey Larry, Where the hell did you learn that leak detection method....your proctologist? M Sent from my Verizon 4G LTE smartphone -------- Original message -------- From: Dave Londry <davel(a)emspace.com> Date: 9/18/16 4:45 PM (GMT-08:00) To: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Water in glove box Well crap Larry - that's about how I look for cooling system leaks, but I never thought of car leaks. Awesome! Dvae On 2016-09-18 7:34 AM, Larry - Ohio Time wrote: > Robert, > > > I do things a bit differently (who's surprised?) to find water leak. On my > big Sears shop vac it has a blower connection. I make an adapter plate, with > hole for the vac hose, to fit into the window channel with the window down 5 > or 6". You will need to tape the panel in good with painters tape to seal > it. > > The next thing you will need is a spray bottle with a bit of soap in it. I > use my car washing soap so not to mess up my wax job. > > When you turn the vac on, with the hose in the "blow hole" you are now > pressurizing the cabin of the car. > > Spray the soapy water around and you will see it bubble up where you have a > leak. You will be surprised by the number leaks you find. > > Larry (I doun't always suck) - Cleveland > > > > -----Original Message----- > From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf > Of Robert Stroj > Sent: Sunday, September 18, 2016 4:57 AM > To: detomaso(a)server.detomasolist.com > Subject: Re: [DeTomaso] Water in glove box > > Hi, > > > > Thanks for all the suggestions, I hope that it could be a case of a leak > trough the went tube. > > My car is early model with direct vent, operated by a pull-lever below the > AC control button. > > > > I really think this makes sense as amount of water (roughly 1L I would > estimate) that entered after just quick wash seems impossible to get through > window gasket.I hope! > > Now I do not have access to the car till spring, but remember noticing that > window seal has been sealed additionally with black silicon, so hope that is > OK. > > Once I get back to Europe will open scrim panels around wipers and check if > I can find what's going on there. > > I guess there must be somewhere a drain in there; might be plugged and then > all water just leaks trough vent opening. > > > > Thanks again for all the responses, Robert > > > > From: The Goyaniuks [mailto:andriykoisg@yahoo.ca] > Sent: Saturday, September 17, 2016 2:19 PM > To: jgkrenton(a)comcast.net; Robert Stroj; detomaso(a)server.detomasolist.com > Subject: Re: [DeTomaso] Water in glove box > > > > In early cars, I believe there was a fresh air "tube" or cylinder that was > installed in the passenger side cowl vent "tub". In addition there is a > water drain in the cowl vent "tub". In the event of a crack or corrosion in > the weld that attaches these items ... it could be the source of the leak. > > > > HTH > > > > > > > > _____ > > From: "jgkrenton(a)comcast.net" <jgkrenton(a)comcast.net> > To: Robert Stroj <npdrs(a)maui.net> > Cc: detomaso(a)server.detomasolist.com > Sent: Saturday, September 17, 2016 7:54 PM > Subject: Re: [DeTomaso] Water in glove box > > > Dolomites are beautiful. > On my car (2467) it's the lower windshield seal leaking that fills up > the glove box. > It rains in Seattle. > FYI. > Jeff > __________________________________________________________________ > > From: "Robert Stroj" <npdrs(a)maui.net> > To: detomaso(a)server.detomasolist.com > Sent: Saturday, September 17, 2016 9:40:43 AM > Subject: [DeTomaso] Water in glove box > > > Hi, every time I wash my Pantera (71 model) I was finding front right > carpet > getting wet in the foot area. > Last time I happened to open glove box after the wash and it was > totally > filled with water! > Driver side seems to stay dry. > This is not even pressure wash, just regular wash without crazy > spraying > around the door frames etc... > I guess it must somehow come in through the front went holes behind the > hood? > It seems that when I washed the car parked slightly nose up it stayed > dry. > Also, recently got caught in heavy rain, but did not really get water > inside; maybe when car moves it drains different way...? > Did anyone have a similar problem and any suggestions where to look/how > to > fix? > Also, my wipers work just on second speed; on first nothing happens. > Would > that likely be a switch issue or it could be that they are wired wrong? > Thanks, Robert > PS. A nice photo from recent drive over Dolomites...just trying to pull > out > front fender lip a bit :) > _______________________________________________ > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > To manage your subscription (change email address, unsubscribe, etc.) > use the links above. > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the > list. They also grant the list owner permission to maintain an archive > or approve the archiving of list messages. > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use > the links above. > > Members who post to this list grant license to the list to forward any > message posted here to all past, current, or future members of the list. > They also grant the list owner permission to maintain an archive or approve > the archiving of list messages. > > > > > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. > > -- Dave Londry Embedded Spaces Inc. (ESI) davel(a)emspace.com 904 429 1937 (SkypeCall FLA) Skype:embeddedspaces Canada Numbers 604 721 2278 (cell) 604 589 9182 (shop line) 604 589 9183 (home line) _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

5 5

Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 19
by Owen Cooke 22 Sep '16

22 Sep '16

guys i had overheating problems i put in a new hall brass rad but my car had bleed pipe from the rad back to the swirl tank and no fitting in halls rad for it apart from a top bleed screw so i made a junction to fit the original bleed screw and the bleed pipe to it then new mariah (is that the right name) that fir on the stock brackets and wired them directly from the battery to the relays i found the hole under the thermostat was blocked with solder i removed that and fitted a new stat now all is perfect temp wise - warms up steady and holds the 90c or 195f in all conditions my gauge with sender in block beside the pump/stat ready 150f but its steady and i know what to expect very happy with result owen cooke On 16/09/2016 23:31, detomaso-request(a)server.detomasolist.com wrote: > Send DeTomaso mailing list submissions to > detomaso(a)server.detomasolist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://server.detomasolist.com/mailman/listinfo/detomaso > or, via email, send a message with subject or body 'help' to > detomaso-request(a)server.detomasolist.com > > You can reach the person managing the list at > detomaso-owner(a)server.detomasolist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of DeTomaso digest..." > > > Daily Detomaso List Digest > > Today's Topics: > > 1. Fans and shroud (Jack Donahue) > 2. Re: Fans and shroud (Himes, Terry (397C)) > 3. Tires for Grp IV Flared Car (MyCars) > 4. Re: Tires for Grp IV Flared Car (LSJ) > 5. Re: Fans and shroud (Jack Donahue) > 6. Re: Fans and shroud (Jack Donahue) > 7. Re: Fans and shroud (Larry Stock) > 8. McLeod hydraulic throw out (Cullen McCann) > 9. Re: Fans and shroud (Ken Green) > 10. McLeod hydraulic throw out (Larry Finch) > 11. Re: Tires for Grp IV Flared Car (MyCars) > 12. Re: Tires for Grp IV Flared Car (MyCars) > 13. Re: McLeod hydraulic throw out (Will Kooiman) > 14. Re: McLeod hydraulic throw out (Cullen McCann) > 15. Re: McLeod hydraulic throw out (Larry Stock) > 16. Re: Sanden Compressors noises (Mike Drew) > 17. Re: Sanden Compressors noises (Julian Kift) > 18. Re: Sanden Compressors noises (Mike Drew) > 19. Re: McLeod hydraulic throw out (Larry Finch) > 20. Re: McLeod hydraulic throw out (Cullen McCann) > 21. NPC, Need transmission suggestions (michael frazier) > 22. Re: Sanden Compressors noises (David Nunn) > 23. Re: NPC, Need transmission suggestions (bill) > 24. Re: Sanden Compressors noises (bill) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 16 Sep 2016 09:29:46 -0700 > From: Jack Donahue <demongusta(a)gmail.com> > To: "detomaso(a)server.detomasolist.com" > <detomaso(a)server.detomasolist.com> > Cc: "detomaso(a)server.detomasolist.com" > <detomaso(a)server.detomasolist.com> > Subject: [DeTomaso] Fans and shroud > Message-ID: <CF682A66-9CF9-422E-AD65-2D23A9ABE4BC(a)gmail.com> > Content-Type: text/plain; charset=utf-8 > > Hey all - A few weeks ago I was talking asking The List about radiators - all said-and-done, I decided on the Hall radiator, since I wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to admit it?s because I want to, not necessarily NEED to. It ain?t broke, but I am fixing it(?). Didn?t want to admit that, but...Lol. There really is an ulterior motive, but I just don?t want to mention it right now; but I ran my idea past Brassworks - who says they will ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?. > Now - fans. I really don?t know the brand name of my fans, but they are suckers - about 12? diameter - and the blades are ?curved? - sickle-shaped. The names that been bouncing around are Mariah, SPAL, and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s since they said they can be - or are - mounted in a shroud that is a perfect match for the Pantera radiator size. I think. And someone offered-up a part number, but I deleted (or lost) it. All normal for me. > So - I am ready for opinions/suggestions: > jack > #4348 > > ------------------------------ > > Message: 2 > Date: Fri, 16 Sep 2016 16:54:05 +0000 > From: "Himes, Terry (397C)" <terry.himes(a)jpl.nasa.gov> > To: Jack Donahue <demongusta(a)gmail.com>, > "detomaso(a)server.detomasolist.com" <detomaso(a)server.detomasolist.com> > Subject: Re: [DeTomaso] Fans and shroud > Message-ID: <D4016E9F.92F3B%thimes(a)jpl.nasa.gov> > Content-Type: text/plain; charset="utf-8" > > Jack, > > Good stuff. I too am running the original radiator with new fans. I'm not going to change it > now but I will follow your progress. Someday I will have to deal with it. So keep posting and > I will keep saving the responses. ;-) > > Terry > > > > "A Purple Heart proves you were smart enough to hatch a plan, > stupid enough to try it and lucky enough to survive!" > > Terry W. Himes > JPL Jet Propulsion Laboratory > Dawn Spacecraft Team > Rosetta Sequence Team Lead > Phone: (818) 393-6261 > Cell: (818) 653-8213 > Fax: (818) 393-3147 > thimes(a)jpl.nasa.gov<mailto:thimes@jpl.nasa.gov> > ?? > > From: DeTomaso <detomaso-bounces(a)server.detomasolist.com<mailto:detomaso-bounces@server.detomasolist.com>> on behalf of Jack Donahue <demongusta(a)gmail.com<mailto:demongusta@gmail.com>> > Date: Friday, September 16, 2016 9:29 AM > To: "detomaso(a)server.detomasolist.com<mailto:detomaso@server.detomasolist.com>" <detomaso(a)server.detomasolist.com<mailto:detomaso@server.detomasolist.com>> > Cc: "detomaso(a)server.detomasolist.com<mailto:detomaso@server.detomasolist.com>" <detomaso(a)server.detomasolist.com<mailto:detomaso@server.detomasolist.com>> > Subject: [DeTomaso] Fans and shroud > > Hey all - A few weeks ago I was talking asking The List about radiators - all said-and-done, I decided on the Hall radiator, since I wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to admit it?s because I want to, not necessarily NEED to. It ain?t broke, but I am fixing it(?). Didn?t want to admit that, but...Lol. There really is an ulterior motive, but I just don?t want to mention it right now; but I ran my idea past Brassworks - who says they will ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?. > Now - fans. I really don?t know the brand name of my fans, but they are suckers - about 12? diameter - and the blades are ?curved? - sickle-shaped. The names that been bouncing around are Mariah, SPAL, and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s since they said they can be - or are - mounted in a shroud that is a perfect match for the Pantera radiator size. I think. And someone offered-up a part number, but I deleted (or lost) it. All normal for me. > So - I am ready for opinions/suggestions: > jack > #4348 > _______________________________________________ > > > Detomaso Email List is not managed by POCA > Posted emails must not exceed 1.5 Megabytes > DeTomaso mailing list > DeTomaso(a)server.detomasolist.com<mailto:DeTomaso@server.detomasolist.com> > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. >

7 11

Re: [DeTomaso] Pantera on Fast & Loud
by David Nunn 21 Sep '16

21 Sep '16

As far as exposure is concerned; Gas Monkey Garage's first posting on Instagram, of their finished Pantera, has been viewed by 147,666 people. Like it or not, that's great exposure. Comments are almost all positive. Their second posting was viewed over 100,000 times. Wilwood and GMG's wheel supplier (Rotiform) have also been posting pics of the GMG Pantera on social media and have had thousands of viewings. As far as exposure is concerned; Gas Monkey Garage's first posting on Instagram, of their finished Pantera, has been viewed by 147,666 people. Like it or not, that's great exposure. Comments are almost all positive. Their second posting was viewed over 100,000 times. Wilwood and GMG's wheel supplier (Rotiform) have also been posting pics of the GMG Pantera on social media and have had thousands of viewings.

3 2

Weights for wheel balance on Magnesium
by Charles McCall 21 Sep '16

21 Sep '16

Hi all I'm pretty sure I've read recommendations in this list regarding proper installation of the weights added during wheel balancing, but I don't remember what they were. Are there special considerations that should be taken into account when balancing a magnesium rim and associated tire so as not to damage the magnesium? Thank you! Hi all I'm pretty sure I've read recommendations in this list regarding proper installation of the weights added during wheel balancing, but I don't remember what they were.A Are there special considerations that should be taken into account when balancing a magnesium rim and associated tire so as not to damage the magnesium? Thank you!

4 3

NPC: Yahoo email problems
by Asa Jay Laughton 21 Sep '16

21 Sep '16

Has anyone with a Yahoo account had serious problems today? Like not being able to get into your account? Seeing other user accounts email in your account? Yahoo says they have a problem with -some- email accounts but not all. Asa Sent using Jedi Mind Tricks Has anyone with a Yahoo account had serious problems today? Like not being able to get into your account? Seeing other user accounts email in your account? Yahoo says they have a problem with -some- email accounts but not all. Asa Sent using Jedi Mind Tricks

3 3

High speed touring and radar detectors
by Charles Engles 21 Sep '16

21 Sep '16

Dear Unlucky Ones, Would you have been using radar detection? If so, then what were you using? Lucky so far this century (I'll forget the last century), Chuck Engles -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Christopher Kimball Sent: Tuesday, September 20, 2016 2:02 PM To: Jack Donahue; Charles McCall Cc: Pantera Owners Club of America Subject: Re: [DeTomaso] Pantera on Fast & Loud Same thing happened to me on the way to a Fun Rally. $850. Ouch. Chris From: demongusta(a)gmail.com Date: Tue, 20 Sep 2016 11:02:49 -0700 To: charlesmccall(a)gmail.com CC: detomaso(a)server.detomasolist.com Subject: Re: [DeTomaso] Pantera on Fast & Loud YUP - nice desert road - no on/off ramps - no bridges = high speed - got me from the FRONT coming AT ME - so the rearview mirror only worked watching him do a giant U-turn - THEN he was behind me. > On Sep 20, 2016, at 10:08 AM, Charles McCall <charlesmccall(a)gmail.com> wrote: > > Yes, but there may be moments when seeing what's behind you IS important. > See photo :-( > > > -----Original Message----- > From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On > Behalf Of Larry Finch via DeTomaso > Sent: martes, 20 de septiembre de 2016 18:43 > To: Email List Address For Posting > Subject: [DeTomaso] Pantera on Fast & Loud > > Jack, > > Rear-view mirror? > > Have you forgotten the inspirational words of Franco (Raul Julia) in > the Gumball Rally movie? > > Larry > > <Me, Geoff, Gendarmes.jpg><oops > 2.JPG>_______________________________________________ > > > Detomaso Email List is not managed by POCA Posted emails must not > exceed 1.5 Megabytes DeTomaso mailing list > DeTomaso(a)server.detomasolist.com > http://server.detomasolist.com/mailman/listinfo/detomaso > > To manage your subscription (change email address, unsubscribe, etc.) use the links above. > > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso(a)server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

4 4

Pantera on Fast & Loud
by Larry Finch 21 Sep '16

21 Sep '16

Jack, Rear-view mirror? Have you forgotten the inspirational words of Franco (Raul Julia) in the Gumball Rally movie? Larry Sent from me using a magic, handheld electronic gizmo.

6 6

Re: [DeTomaso] NPC: Yahoo email problems
by ehpantera 21 Sep '16

21 Sep '16

I'm ok. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Asa Jay Laughton <asajay(a)asajay.com> Date: 9/20/16 3:30 PM (GMT-06:00) To: Cc: detomaso(a)server.detomasolist.com Subject: [DeTomaso] NPC: Yahoo email problems Has anyone with a Yahoo account had serious problems today? Like not being able to get into your account? Seeing other user accounts email in your account? Yahoo says they have a problem with -some- email accounts but not all. Asa Sent using Jedi Mind Tricks I'm ok. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Asa Jay Laughton <asajay(a)asajay.com> Date: 9/20/16 3:30 PM (GMT-06:00) To: Cc: detomaso(a)server.detomasolist.com Subject: [DeTomaso] NPC: Yahoo email problems Has anyone with a Yahoo account had serious problems today? Like not being able to get into your account? Seeing other user accounts email in your account? Yahoo says they have a problem with -some- email accounts but not all. Asa Sent using Jedi Mind Tricks

1 0

Carpeting
by Forest Goodhart 21 Sep '16

21 Sep '16

A few years ago I had my carpeting redone using "Wilton Wool" material. This has proven to be an unwise choice as the carpet constantly sheds and in some places is down to the backing. I would like to replace this with something that looks good but is more durable. Does anyone on this list have knowledge of what would be an appropriate carpet material that comes is a color that matches mid 80's Corvette buckskin color? Forest A few years ago I had my carpeting redone using "Wilton Wool" material. This has proven to be an unwise choice as the carpet constantly sheds and in some places is down to the backing. I would like to replace this with something that looks good but is more durable. Does anyone on this list have knowledge of what would be an appropriate carpet material that comes is a color that matches mid 80's Corvette buckskin color? Forest

1 0

Thermostat .... visual differenced between Cleveland and. Windsor thermostats
by Ed Lyerly 20 Sep '16

20 Sep '16

I have read several times of Pantera owners having overheating problems that were at least partially caused by using a Windsor thermostat in the Cleveland Pantera engine. Does anyone have a picture they could share which would allow a visual identification of the differences in these different thermostats? Thanks, --Ed L I have read several times of Pantera owners having overheating problems that were at least partially caused by using a Windsor thermostat in the Cleveland Pantera engine. Does anyone have a picture they could share which would allow a visual identification of the differences in these different thermostats? Thanks, --Ed L

4 6